How do I Access my Nighthawk Router Remotely?

Remote access is now one of the most common things, a person looks for today while they purchase a router. Every user wants to control and manage their device from a distant place.

Note: Make sure that you change the admin password to a secure and robust one. However, an ideal password involves no dictionary words from any language. It must contain a combination of uppercase and lowercase letters, numbers, and special symbols.

How to Change the Admin Password of Your Router?

When you buy any new router, it comes with factory default settings. To implement security, it is recommended to change the password. The admin password is not one that we use to access WiFi. This password can also be changed from the admin console of the router. For this, you have to:

• Visit the web interface of your router using a web browser on URL http://routerlogin.net.
• Log in using your default router name and password.
• On the home screen, Select ADVANCED > Administration > Set Password.
• Enter the old and new passwords.

• Click Apply to save changes.

While most users want to access the Nighthawk router remotely but they face issues sometimes. So, this step-by-step guide discusses how one can set up and access the Nighthawk router remotely.

Quick Steps to Access Nighthawk Anywhere Access

Step 1: Open any installed Internet browser on your computer or wireless device. Ensure that your device and Nighthawk router should be sharing the same network.

Step 2: Enter the official URL address http://www.routerlogin.net or http://www.routerlogin.com to visit the router page. Then, a login screen is displayed.

Step 3: Fill in the user name and set a password for your Nighthawk router. By default, the user name is admin and the default password is password. Note that both the user name and password are case-sensitive data.

Most importantly, you must be aware of your router’s WAN IP address in order to use this remote access feature. But, how to access the Nighthawk router remotely, any idea?

You can now see the BASIC Home screen is displayed.

Step 4: Select the Advanced Setup option under the Advanced tab of the admin console and then click on Remote Management.

Step 5: Tick the Turn Remote Management On checkbox and enable it.

Step 6: Go to the Allow Remote Access By section and enter the external IP addresses through which you want to access the router’s remote management:

Important Note: For improved and better security, give access to few external IP addresses only.

You Can Choose From the Following Options:

Step 1: Select the Only This Computer radio button if you want to allow access to a single IP address on the Internet. Subsequently, enter the specific IP address to which you want to allow access.

Step 2: Select the IP Address Range radio button if you want to allow nighthawk anywhere access to a range of IP addresses on the Internet. Also, enter the start and ending limit of the IP address to define the allowed range.

Step 3: Select the Everyone radio button if you want to give access from any IP address on the Internet.

Step 4: Enter the port number for accessing the web management console.

Do you know that a normal web browser makes use of standard HTTP service port 80? So, for enhanced security, you can set a custom port number for the remote web management interface. You can choose any number from 1024 to 65535, but never use the number of any common service port. By default, the port number is 8080, which is a common alternate for serving HTTP requests.

Step 5: Finally, click on the Apply button. Here, the changes will take into effect.

Now once you set up remote service, how will you access the Nighthawk router remotely? To solve this query, follow the provided quick instructions below. The maximum length of the password can be up to 30 characters.

Steps to Access Nighthawk Router Remotely

Step 1: Firstly, launch any Internet browser on your computer that should not run on your home network.

Step 2: Secondly, enter the router’s WAN IP address into your browser’s address bar or location field followed by a colon (:) and the custom port number.

Like, if your external address is 134.177.0.123 and you want to use port number 8080. Then, enter http://134.177.0.123:8080 in the address bar of your browser.

The remote router management feature allows you to access and control your router over an Internet connection. You can easily view or modify the router settings from any location.

Hope this blog eases you to access Netgear nighthawk remote.