How do I Setup Remote Management on My Nighthawk Router?

With the exercise of the “Setup Remote Management on my Nighthawk router” activity you can access the admin panel of your Nighthawk router and can easily change the configuration settings besides viewing the same. This quick reference guide is drafted with the simple do-it-yourself way to help you facilitate the “Setup Remote Management on my Nighthawk router” process.

Benefits that will Accrue after Setting Up Remote Management

• Any other person would be able to administer your Nighthawk router configuration.

•  After the setup Remote Management on my Nighthawk router feature is enabled, you can have a leeway when it comes to troubleshooting someone else’s router.

• It will also become possible for you to control your router from a remote location.

• It would provide more flexibility while configuring your router using WAN.

The Way to Setup Remote Management on My Nighthawk Router

Step 1 - At first you just have to connect your computer or the other device to the internet network and must open an internet browser on the same.

Step 2 - Now punch in http://www.routerlogin.net or http://www.routerlogin.com in the address bar and press the Enter key.

Step 3 - As soon as the login screen appears, enter the login credentials like username and password in the required fields. Please note that the default username is “admin” and the default password is “password”.

Step 4 - In the next step you have to click on the “Advanced Setup” tab under the “Advanced” segment of your account page.

Step 5 - Now find and select the “Turn Remote Management” checkbox by placing a tick on the same.

Step 6 - At this stage enter that very external which in your opinion should be allowed to access your Nighthawk router’s router management. 

Here are three options from which you Can Select One:

• When you have aspirations to allow one single IP address for the remote access of your Nighthawk router then choose to select the “Only This Computer” radio button along with specifying the IP address for which you want the remote access over the internet.   

• If you wish to allow a range of IP addresses for accessing the router configuration management over the internet then you have to select the “IP Address Range” radio button followed by entering the starting and ending IP address along with defining the allowed range for remote access as regards the “Setup Remote Management on my Nighthawk router” activity.  

• You can also select the “Everyone” radio button in case you wish to allow everyone remote access to your Nighthawk router.

Step 7 - At last, you have to enter the port number that will facilitate accessing the web management interface of your Nighthawk router.