How do I Update Router Firmware Using NETGEAR Desktop Genie?

Update Router Firmware Using NETGEAR Desktop Genie:

NETGEAR desktop genie is a rapidly growing application that allows you to control, keep track of and restore your home network. This app is easily available on your iPhone or iPad. You can also access your router and perform various functions using the app’s dashboard. It supports Cable modems, WNDR3400, WNR2000, DSL modem routers, and many more.

While the app allows you to connect your devices to the router, it also provides you with a special feature- NETGEAR Genie update router firmware using NETGEAR desktop Genie to update your router’s firmware.

To do this you must make sure that you are using the latest Netgear Genie firmware update software by the company. These steps are applicable only if you are using a router that is supported or compatible with the NETGEAR application.

Step To Update Router Firmware Using NETGEAR Desktop Genie:

Step 1: Open NETGEAR software on your Desktop.

Step 2: Now you need to select the Router Settings option from the left side menu. Or you can also click on the “Click here” link under the Router Settings thumbnail.

Step 3: Next on the Router Settings page, you will see the Username and Password boxes. Fill in your username and password. Note that the default username and password are case-sensitive. Type the username as admin and the default Password as password in the next field.

If you have not changed your password then you can use the default password otherwise you will have to use the changed password. If you are still unable to load the configuration page then you need a factory reset to restore the application to its factory settings.

Step 4: After you have logged in, you will be redirected to the Wireless Settings of your router.

Step 5: On the top-right corner of the page, you will notice the left and right arrows. Click on the right arrow to see the Netgear Router Update tab.

Step 6: Now click on the Router Update tab, this will show you the Router Update feature. Click on the Next button.

Step 7: You will see if there is any firmware available for your router. If there is no firmware available then the message- “Current firmware version is the most recent”.

Step 8: If there is new firmware available for your router then the page will show you the necessary information about it (version, model, current firmware, next firmware, etc).

If you click on the message- “A new firmware upgrade is available.” You will have to click on the mentioned link to get it.” Then you will again be redirected to the Firmware Information Page.

Step 9: Now click on the Next button. The genie will show that the firmware check is complete and it will provide you with the manual steps on how to update the firmware manually.

Step 10: Next, you will be redirected to the Router login page on your web browser.

Step 11: Log in to your Router Settings page. And click on the “A router firmware update is available” message shown on the page to begin the update process.

Step 12: Your router will now try to establish a connection with the NETGEAR servers to collect the information on your router’s new firmware.

Step 13: After doing this the page will show you the details of the new firmware. Click on Yes to initiate the update.

Step 14: The Firmware Assistant will download the new firmware and then after downloading it will upload the firmware on your router.

Step 15: After successfully uploading the firmware, the router will reboot itself. Next, you will be redirected to the NETGEAR Genie Settings page.

Step 16: On the top-right corner, you will be able to see the updated version of the firmware.

Conclusion

By following these steps, you can easily Update Router Firmware Using NETGEAR Desktop Genie for the smooth working of your router. Thus, the software is updated and will perform its normal functions as established.