How to Boost Wi-Fi Speeds on a Netgear Router?

Netgear router is the most widely used wireless router equipped with live parental control. It comes with ready share USB access and also comes with powerful antennas which are used to improve wireless speed and range.

It usually comes with a Netgear genie app with an interactive dashboard. By using a dashboard you can control to manage, monitor, and repair your home network. Netgear router comes together with WPA2 security access and it comes with double firewall protection.

How to make Netgear router faster works under a 2.4 GHz to 5.0 GHz band and it comes with one USB 2.0 port. Sometimes it does not work as your expectation consequently, which means that what speed you are expecting from the router, that speed it does not deliver.

So if you are looking to boost Wi-Fi speeds on a Netgear Router, you have to look out for the following things to boost up speed.

Let us Discuss Some Steps to Boost WiFi Speeds on a Netgear Router

Accessing Netgear Router Web Interface:

Step 1: Firstly you need to open any installed browser on your computer ie. Google Chrome and Mozilla Firefox thereafter type the address in the browser address bar which is http://192.168.1.1 or http://192.168.0.1. One of the links will definitely work.

Step 2: On entering this address in the address bar, furthermore, you will get the login screen.

Step 3: At the login screen enter your credentials like user name and password.

Step 4: Type admin as user name and password as the password in the password box thereafter you need to click on the login button

Step 5: Thereafter select the wireless setting which resides under the setup tab.

Step 6: Tap on the fastest speed from the mode drop-down menu.

Step 7: You need to tap on the apply button and click on the start button and thereafter enter cmd and then press on the enter button.

Step 8: Now you can see the result if you are getting messages like the packet needs to be fragmented but DF set display, you are required to perform ping command again and it will decrease buffer size by 10

Step 9: Repeat all the above steps unless the ping statistics report zero packets lost.

MTU Size of Netgear Router:

• Now it is advised to come back on your browser and then select on WAN setup which resides under the advanced section. You are required to type the MTU size field and the buffer size.
• Such as press on apply button and it will return you to the command prompt where you need to type the following commands like netsh interface ipv4 set subinterface wireless network connection  mtu=[#]store=persistent.
• In the end, switch on the # with the exact buffer size and thereafter press enter to change the MTU values, therefore it matches that of the router. So as a result, reboot your personal computer.

There are Some Other Settings to Boost WiFi Speeds on a Netgear Router

Switch to MTU Size to make Netgear router faster:

Here, we are discussing that a packet-switching network that breaks data into chunks is known as a packet before transmission. Any router has the highest transmission size of a larger packet such that it may send. So choosing MTU Size Netgear is a bit challenging even larger packet includes more data and it may destabilize the network.

As you know that optimum unit size depends on the application which you are operating it. Like Netgear router recommends you decrease the MTU size from its default value of 1500 to 1436 to get better performance from any type of VPN Connection.

Change the Wireless Channel to Boost WiFi Speeds on Netgear Router:

Changing the wireless channel creates a clear wireless signal to avoid wireless signal frequency distribution which has so many network disturbances. In this case,you are required to change your Netgear wireless router channel 1,6,11 as all these channels never overlap to each other on the available frequency spectrum.

On the other hand, these channels support dual-band transmission So the devices transmit in a completely different frequency band is an efficient way to provide a very clean signal.

Create MAC Filtering:

As you know that media access control filtering is one of the processes or ways by which restricts network access through MAC filtering enable. It blocks all the network traffic except network traffic from the approved MAC Addresses. You can change this feature from the security tab of your Netgear router menu.

Even though a security feature primarily, MAC Filtering helps to enhance network efficiency by confirming that no unauthorized device can access the network.

Upgrade Firmware to Boost Wi-Fi Speeds on Netgear:

The router’s firmware is the main cause to boost the speed of your Netgear router. If you want to boost your Netgear router speed, you need to update your Netgear router firmware at regular intervals.