How to Flash Your NETGEAR Router with DD-WRT?

Do you want to know how to flash your Netgear router with DD-WRT? If yes, then you have come to the right place as here you will be able to learn how to do that by following 5 easy steps.

The Process to Flash the Netgear Router with DD-WRT is Quite Simple and can be Easily Carried out by Performing Simple Steps and Terms.

So, let’s begin with the process.

Step 1: Identification Of Your Netgear Router Model

This is an important step. Therefore, you must not skip this one. The model can be easily identified by looking at the sticker pasted at the base of your router unit. The model number is very much similar to R8000 and R9000.

A few Netgear routers have updated versions like R6400. Some of these advanced models are a lot like the previous models but they have different hardware. This means that a different DD-WRT build is required.

Step 2: Check The Firmware That You Need To Flash MY Netgear 

Once you are done determining the model of your router, then the next thing that you need to do is to search for the firmware that you are required to flash my router. Upgrade your router from the stock Netgear firmware.

DD-WRT generally uses 3 types of firmware flash files. These include.CHK files, .IMG files and . BIN files. After that, go to the section of firmware downloads where you will find the perfect guide to install the right version.

For instance, if you want to download the firmware for the R7800 model, then you need to upgrade from the earlier DD-WRT installation. After that, search for the initial flash file link. You must read out the documentation that includes information about the firmware build.

Step 3: Reset Your Netgear Router Device t To Factory Default Settings

You can do this by pressing the reset button placed at the back of your router device. Alternatively, you can open the web interface by entering the IP address of your router. There are a few router units that may require a 30-30-30 reset.

Step 4: Flash The DD-WRT File For The Netgear Router

Once you are done logging into the interface of your Netgear router, then select the option of Advanced. After that, go to Administrator and then select Router Update.

Search for the right first flash file from your PC and then move ahead with the upgrade process. Don’t turn off your router device during this process. The process is going to take a while.

Step 5: Reset Your Netgear Device Default Settings

Once you are done with the previous step, then you need to log into the DD-WRT by entering the default IP address in the location bar of the web browser. After that, you will be required to enter the username and password to open the control panel page.

Open the Admin page and then select the option of factory defaults. Now, choose the option of restoring to factory defaults. When you are done with the reset process, then the first installation of DD-WRT will begin.