How to Install a Netgear Wireless Router Without the CD?

Netgear is a company that has been in the Router business for a long time and it has been making Router and other telecom Equipment for a long time now. The company has been making products for both offices to businesses and home users.

These routers help people to use the Internet without any wires or cables.  But before using it wirelessly you need to set up the router with the help of a computer and a LAN cable. So, if you are in search of the procedure for How to Install a Netgear Wireless Router Without the CD?

Install a Netgear Wireless Router Without the CD

The installation disc that comes along with your Netgear router makes the installation process a lot easier in comparison to before. In case the disc is broken or lost, then you, then you can still use the control panel of your Netgear router.

Using this control panel, you can easily add security protocols, set up a wireless network, view devices connected to your network, and change the administrator password.

Below are the simple steps that you need to follow in order to install the Netgear wireless router without a CD. 

Step 1: Connect your modem to the wireless router using an ethernet wire connected to the line in port. Use an additional networking cable and run it from the back of your router to the numbered ports. Now, when the router gets configured, you must disconnect it from your PC. After that, reconnect your router to the electrical outlet and press the power button. 

Step 2: Launch your internet browser and enter your IP address www.routerlogin.net in the location bar of your browser. Enter admin as the default username and enter a password as the default password and then click on log in. 

Step 3: After that, you must select the link of wireless settings by going to the dashboard of your router. There, you need to alter the settings. Now, open the list and go to the security option like WPA or WEP. If you wish to keep your network safe from intruders, then you need to protect it with a password. 

Step 4: Now, select the option to apply for changing the wireless settings. Now, use a compatible wireless device to log in using the new password you created. Close your internet browser and remove the ethernet wire from your PC if you wish to connect wirelessly. 

Step To Netgear Wireless Adapter Setup without CD 

Step 1: Firstly, you need to shut down the router. Afterward, you need to shut down the PC as well. This procedure is necessary for further afterward procedure.

Step 2: Then search for the LAN/Ethernet wire that is the main connection between the router and computer. You need to disconnect this wire from the PC or Laptop. The Ethernet wire is connected at the back of your router. The main line is connected to the router and the computer. This cable will connect at the back of your computer.

Step 3: Now, you have to connect the ethernet wire again at the backside of the Netgear router. You have to connect this cable for the further process of Installation of Netgear Router without CD.

Now, the Main Procedure to Install Netgear Wireless Router without CD will Start.

Step 1: Now, use the LAN wire and insert it into LAN 1 in the back of the router. After you have connected the wire to the router you now have to connect the router to the main computer. Insert the wire in the same Ethernet port of the computer.

Step 2: Next, for accessing the Netgear Router with the CD you need to switch on the router. For that connect the router with the main electrical source.

Step 3: Now, the router will switch on. Wait for some time as the router switches on fully and the router lights start blinking. You need to be sure that all the lights in the router are blinking and working and that the router is fully on.

Step 4: If the router is not working fully then you need to check if the source of the service is fully working. Confirm, if the third light in the router is not working, in that condition then you need to check the connection between the router and the computer or PC.

Here, You Need to Check the Connection Properly.

Step 1: Examine the wire in both the router and computer to see whether they are properly connected. This step is necessary for the proper installation of Netgear Router without CD

Step 2: Thereafter, all the connections are checked and checking that both computer and router is linked, then we need to open the internet browser. That can be any browser, whether it’s Mozilla Firefox, Google Chrome or Microsoft Edge.

Step 3: When you access the browser, you will reach with the login page in which you have to fill the basic credentials. These credentials are Username and Password.

Step 4: In those credentials, you have to fill up the password and SSID that are the default case in the Netgear router. If you cannot log in into the account if you can use the paperwork that came with the router.

Step 5: After following this procedure, you can simply and easily make a connection with the router and install Netgear Router without CD. The procedure will guide to complete the process of installation without CD.