How to Reset NETGEAR N900 Router?

This article discusses Reset Netgear N900 router can be a useful troubleshooting step to resolve various network issues or restore the device to its default settings. Whether you've forgotten the router's login credentials, encountered persistent connectivity problems, or simply wish to start afresh, a reset can often be the solution. This article will guide you through the process of Reset NETGEAR N900 router step-by-step.

Understanding Router Reset:

A router reset involves restoring the device to its original factory settings and clearing any custom configurations and preferences you might have applied. There are two main types of resets - a soft reset and a hard reset. A soft reset simply reboots the router, while a hard reset erases all personalized settings and restores the router to its default state.

Preparing for the Reset:

Before you proceed with the reset, make sure to take the following precautions:

• Backup: If you have important configurations or custom settings, consider backing them up. A hard reset will erase all settings, and having a backup will help you restore them later.

• Physical Inspection: Check the router for any physical damage or loose connections. Make sure it's connected to a stable power source during the reset process.

Soft Reset (Using the Reset Button):

A soft reset is a quick way to restart your router without affecting the saved settings.

Follow these steps to perform a soft reset:

• Locate the "Reset" button on your netgear n900 reset. It is usually a small pinhole button on the back or bottom of the device.

• Using a paperclip or a thin object, press and hold the "Reset" button for about 10-15 seconds.

• Release the button once the router's lights blink or flash, indicating that the reset process has started.

• Allow the router a few minutes to complete the reboot process. Once the lights stabilize, the router should be reset.

Hard Reset (Using Web Interface):

If you want to completely the netgear router reset button to its factory defaults, follow these steps:

• Connect your computer to the router either wirelessly or via an Ethernet cable.

• Open a web browser and type the router's default IP address in the address bar. The default IP address is typically "192.168.1.1," but it may vary based on your specific model.

• You'll be prompted to enter the router's login credentials. By default, the username is "admin," and the password is "password" (without quotes). If you've changed the login credentials in the past and can't remember them, proceed with the soft reset as mentioned earlier.

• Once logged in, navigate to the "Maintenance" or "Advanced" section of the router's web interface.

• Look for the "Factory Reset" or "Restore Factory Defaults" option. Click on it to initiate the hard reset process.

• Confirm your action when prompted. The router will now reset to its factory defaults.

• Wait for the router to reboot, which may take a few minutes.

After the Reset

After the reset, the router will be in its original out-of-the-box state. You can now set it up from scratch using the default login credentials and configuring the network settings as required. If you backed up your previous configurations, you can also restore them now.

Conclusion

Resetting the NETGEAR N900 router can be an effective way to troubleshoot network issues and restore the device to its default settings. Both soft and hard resets serve different purposes, so choose the appropriate method based on your needs.

Remember to back up your settings before performing a hard reset to avoid losing important configurations. With the router now reset, you can enjoy a fresh start in your network setup.