How to Setup Netgear Nighthawk ac 1750?

Netgear Nighthawk ac 1750 smart Wi-Fi router is an extremely best router, which provides high stream Wi-Fi speed, which is good for online gaming, It has ‘a 1’GHz processor which boosts up the performance of a network,

It also has a heavy-powered amplifier and extra antenna which improves network range. Some users required high-end transmission speed, this router is very much beneficial. 

Step-by-Step Solutions to Setup Netgear Nighthawk AC 1750

For Netgear Nighthawk ac1750 setup, first, you need to make sure your internet service should be active.

1. Positioning Antenna In Netgear Nighthawk AC1750

• Firstly, you need to remove the antenna cap from the antenna port of your router
• Next, attach that removed antenna again, because attaching an antenna with an antenna cap perfectly is responsible for your excellent signal range
• On attaching the antenna, we recommended you place the center antenna in the vertical position for the better performance

2. Get Ready with Your Modem

• Firstly, you need to stop the power supply to your modem
• Next, find if power backup device (battery) is attached with it, remove it from the modem
• Detach your router, if your router is attached with another router that means your router should not be connected with any kind of devices or power

Now you need to connect your modem as a fresh end

1. Firstly, connect your modem to the internet
2. After that, you can give the power supply to your router
3. Later on, attach your modem with battery backup
4. There is a yellow power chord that might come with your router. Use that yellow cable to connect your router with your modem

3. Supply Power to Your Netgear Nighthawk AC 1750

• Now, you need to connect the power adapter to your router and plug it into the power switchboard
• Thereafter, you need to wait for some time to getting light in your router.
• After a few moments, you will get white color light
• If white light does not appear on the upper panel of your router, you need to press the power on/off button

4. Connect Your Computer to The Router

• There are two ways to connect your computer to a router, First one you can connect with Ethernet cable or connect wirelessly, to connect your system with router wirelessly, you need to do some settings like username and password.

Now, finish all the hardware connection settings and check your network by launching a web browser.

5. Open The Web Browser

Suppose that you are going to connect with your router first time, genie screen is appearing in front of you, You need to follow some genie steps to connect with a network, if the genie screen is not appearing  then you need to follow some steps

• You need to close your browser and reopen your browser
• Firstly, you need to confirm that your computer should be connected with one of the black color LAN Ethernet port of your router by which you are connected with your wireless network
• Later on, confirm with LED light should be lit of your router
• Now, you need to check the connection of your computer with the fixed IP address, you need to change with IP address with connect automatically option

After adopting all the steps, if you are not able to see the genie screen, now you need to log in to your router to identify your internet connection by genie

6.   Need to Log in to Your Router

• After opening the browser->Go to ‘www.routerlogin.net’-> For user name enter’ admin’ and for password enter ‘password’. By doing this, if your internet connection is not up, your internet connection is already up by genie connection

7. Set Wireless Network Name and Password

• At present your network name and password are unique for your wireless router, we advised you to use as it is because if you forgot these credentials, you can get it again by the back of your product or you can keep these details on writing somewhere.

8. Connect with Your Wireless Network

• By pressing the ‘WPS’ button of the router on three to five times, you will get white light in your router. After two minutes, pressing the WPS button again, as a result, you will get solid light, which confirms that you are connected to your network with a router by using your devices

Thereafter, you can change the router setting and assign priority for your service and share your USB on the network, and back up of your system by doing some advanced settings.