How to Setup Netgear Nighthawk AX12 Router?

With the Netgear Nighthawk app, configuring your network equipment is made simpler. You need to follow a few simple steps, and your router will be set up.

The app will then walk you through the remaining steps when connecting your smartphone to the router network. Use the simple dashboard to suspend the internet after your setup is complete. Perform a speed test after that.

How to Use the Nighthawk App to Configure a Netgear Nighthawk AX12 Router?

Below are the steps to configure your Netgear Nighthawk AX12 router.

Step 1: Connect the antennas on your router first.

Step 2: Connect your router to the modem next. 

Step 3: Watch for the Wi-Fi LED light to come on after turning on your router.

Step 4: Start your Android smartphone's Play Store or app store.

Step 5: Start looking for and downloading the Netgear Nighthawk app.

Step 6: Configure your netgear nighthawk setup according to the instructions on the screen.

What is the Manual Installation Method for the Netgear Nighthawk AX12 Router?

• The manual installation process for setting up your router is broken down into two steps: A and B.

• You must work on the router's physical connectivity before configuring it.

• Remove all wires that are attached to your computer. Connect your modem's power adapter next, and make sure the power light is on.

Connect your Netgear Nighthawk router following that. The ethernet cable should have one end connected to the modem and the other to the internet port on your router. A little farther apart from the other ports is the internet port.

• Link your router to your computer. Next, attach one end of the Ethernet cable to the computer system's ethernet port.

• Connect your router's power adapter after that, and then make sure the router unit is operational by checking the power light.

• Logging into the Netgear Router in Step B

The procedures you must follow to log into your router are listed below.

• Open your internet browser after connecting your PC to your Netgear router.

• Visit www.routerlogin.com's home page. If this link is inoperable, try typing in the IP address 192.168.1.1.

• You will then be prompted to enter your login and password. A username and password must be entered. Remember that the case of the username and password matters.

• Enter after clicking the login button. The default home screen will then appear after that.

You now have all the information you need to set up a Netgear Nighthawk AX12 router. The installation process or the Nighthawk app can be used to configure it.